Farmi Skidding Winch Menu

Farmi Logging Winch for Skid Steer Loaders

Skidding Accessories

The Farmi Tree Harvesting Method

Features of the Farmi Winches

Farmi SGR76 Tractor Grapple.       

Farmi SSGR50 Skid-Steer Grapple                

VALBY SSGR 60 Skidsteer Grapple

The Valby skid-steer grapple has an opening of 60 inches, and their rotators have over 700 foot-pounds of torque.  They require two sets of hydraulic outlets from the skid-steer.  One pair runs the continuous rotator; the other pair opens and closes the jaws.  This attachment enables the skid steer to be used for moving, stacking and loading chores on the landing, or in the yard.  The skidding grapple is equipped with a universal mounting plate.  The skidsteer grapples are of the modern bypass type.  These grapples close to a tight minimum opening.   Movement of the logs during transport is minimized because the grapple secures the log on the top, bottom, and both sides.  A belly plate protects the cylinder from underneath.  The form of the claws enables a smooth roll-in of the stems.

The modern design bypass grapple opens up to 60 ½ inches. 

Modern bypass grapple design. Weldox 700 is a prime steel used in the manufacture of high quality log grapples. All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting. Large, powerful cylinder. Double connection rods provide good balance and less stress. A belly plate protects the cylinder from underneath. Modern bypass grapple design The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.